Announcement

Collapse
No announcement yet.

D2X Picture Control for D300 Firmware

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • D2X Picture Control for D300 Firmware

    About this software
    This is a set of three optional Picture Controls, one for each of the three D2X/D2XS Color mode settings.
    When these optional Picture Controls are registered with the D300, color reproduction simulating that of images captured with the D2X and D2XS is possible, and custom Picture Controls can also be created based on these optional Picture Controls. For black-and-white images, use the standard Monochrome Nikon Picture Control.

    D2XMODE1
    This optional Picture Control simulates color reproduction at a D2X/D2XS Color mode setting of I.
    Skin tones and gradations are reproduced naturally with rich reproduction of tones.

    D2XMODE2
    This optional Picture Control simulates color reproduction at a D2X/D2XS Color mode setting of II.
    This optional Picture Control is suited to images that will be extensively processed or retouched.

    D2XMODE3
    This optional Picture Control simulates color reproduction at a D2X/D2XS Color mode setting of III.
    Choose for nature or landscape shots. Greens and blues are vividly reproduced.

    *To achieve a level of brightness similar to that of images captured with the D2X/D2XS, set Picture Control Brightness to -1. Color reproduction precisely the same as that achieved with D2X/D2XS Color mode settings I, II, and III is not guaranteed with the three D2XMODE1, D2XMODE2, and D2XMODE3 optional Picture Controls.
    *D2XMODE1-3 optional Picture Controls must be registered with the camera before custom Picture Controls, based on D2XMODE1-3, can be created using Capture NX or ViewNX and registered with the camera.
    "The world is a book, and those who do not travel read only one page" St Augustine




Working...
X