Nissin Di466 (For Four Thirds 4/3 Cameras)
February 21, 2010 - The Nissin group is pleased to announce a new generation of Di466 model at PMA 2010.
Nissin group and our products are always on the cutting edge of design, technology and innovation. This new Di466 is designed for Fourth Thirds system SLR cameras with a classic chic look and high performances. This is the best choice for fashion-conscious photographers.
Di466 (For Four Thirds 4/3) KEY FEATURES
Nissin original “MY TTL” Setting
The TTL flash power level is pre-set for reasonable exposure at factory. You can, however, reset the power
at the desired exposure level, in +-3/4Ev. by 1/4Ev increments.
The preset value is memorized as your personal standard after switching the unit off.
The usual TTL flash level compensation works based on this customized level.
TTL Flash Level Compensation
The power of the flash can be controlled with TTL flash level compensation.
Whereas total exposure is controlled by the camera's EV compensation function, the flash can compensate
for the exposure on the main subject only, with little impact on the exposure of the background scene.
The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.
Dual Program Remote Flash (Slave mode)
Wireless remote flash system of Di466 works for either analogue (single flash) and digital (pre-flash) flash
syste with 6 steps power level available.
Battery Magazine Quick Loading System
2 sec. loading by Nissin original battery magazine
MORE FEATURES
Power zoom of 24-105mm
Manual power ratio of 6 levels
Fast recycling time of 4 sec.
Bounce lighting of 90 degree upward
AF asstist light
Auto shut off energy saving system
Wide angle diffuser built in
Catch light panel built in
Di466 (Four Thirds 4/3 System ) Specifications
|
Compatible cameras : | Micro Four Thirds M4/3 & Four Thirds 4/3 camera
|
| Guide Number : | 33 /108 at 53mm focal length (ISO 100m/ft)
|
| Illumination angle : | 12~53mm (9mm with diffuse panel)
(Automatically set for the lens focal length)
|
| Power source | 4X LR6 or equivalent Mi-MH, lithium, oxyride batteries
|
| Recycling time : | 4.5 sec., by fresh alkaline batteries ; 3.8 sec., by Ni-MH batteries
|
| Energy saving system : | 2 minutes to stand-by mode, 30 minutes to shut down
|
| Number of flashes : | 200 - 1500 flashes by fresh alkaline batteries
|
| Turning head : | Flash head up to 0° ~ 90° with click-stops at 0°, 45°, 60°, 75°, 90°.
|
| Flash exposure control : | TTL ; Automatic exposure ; Manual exposure of 6 power level. |
| Slave mode : |
Slave 1 for digital pre-flash system.
Slave 2 for traditional single flash system.
Power level - same as variable power
|
| Variable power : | 6 levels : 1/1 ; 1/2 ; 1/4 ; 1/8 ; 1/16 ; 1/32 powers
|
| Wireless Flash | Slave function with 6 power level.
|
| AF Assist light : | Orange LED for distance of 0.7 to 6 meter.
|
| Color temperature : | 5,600K (same as daylight)
|
| Flash duration : | 1/800(Full power flash) sec. to 1/20,000(Controlled flash) sec.
|
| Camera contact : | Hotshoe only (not compatible with the traditional hotshoe system)
|
| Dimensions : | 67(W) x 105(D) x95(H) mm / 21(W) x 41(D) x 37(H) inches
|
| Weight : | 240g (without battery) / 8.4oz
|
